Screws around loudspeakers

[BUZZ78]

Hello,

Following last Massimo’s advices around boses stands, I keep in mind that the tightening is important, and I have remembered that sometimes with the four screws around loudspeakers, only three can be tight : the last one turn, at the end, in the void.

I used to tight all this screws when I have a new speakers or after a certain period. My question is, what is your advice when you cannot tight a screw ? I didn’t disassemble the speaker and may be there is a “screws insert” on the boxes.

Thanks
Franck

[M.Ambrosini]

Hello,

Following last Massimo’s advices around boses stands, I keep in mind that the tightening is important, and I have remembered that sometimes with the four screws around loudspeakers, only three can be tight : the last one turn, at the end, in the void.

I used to tight all this screws when I have a new speakers or after a certain period. My question is, what is your advice when you cannot tight a screw ? I didn’t disassemble the speaker and may be there is a “screws insert” on the boxes.

Thanks
Franck

If a screw turns loose, you need to disassemble the speaker and understand why this happens. It is important that all four screws are tight.

[BUZZ78]

It seems “logical” indeed. Do you know if the screws are directly tight “in the wood” ?

[BUZZ78]

After checking, I have one nut (not a screw on 600 boxes) around the medium speaker and two on an other speaker around the tweeter that can’t be tight.